- Mech/IJP/1 Dr. M. Suresh, Associate Professor has been published “Performance enhancement studies on evaporative cooling using volumetric heat and mass transfer coefficients”, co-authored by V. Naveen Prabhu in the Journal, “Numerical Heat Transfer, Part A: Applications” (published by Taylor & Francis). 2019 Clarivate Analytics Impact factor: 2.96
- Mech/IJP/2– Dr. K. Babu, Associate Professor has published “Statistical analysis of mechanical properties of wood dust filled jute fiber based hybrid composites under cryogenic atmosphere using Grey-Taguchi method” along with Velmurugan (Ph.D. Scholar) in Materials Research Express, 7 (2020) 065310.
- Mech/IJP/3– Dr. K. Babu, Associate Professor has published “Utilization of Taguchi Technique to enhance the interlaminar stregnth of wood dust filled woven jute fiber reinforced polyester composites in cryogenic environment” along with Velmurugan (Ph.D. Scholar) in Journal of Natural Fibers, https://doi.org/10.1080/15440478.2020.1789021.
- Mech/IJP/4– M.Nalla Mohamed, Associate Professor has published, “Comparison of Energy Absorption Characteristics of the Plain Fold and Spot-Welded Fold Tubes Under Three-Point Bending”, Trends in Mechanical and Biomedical Design, Lecture notes in Mechanical Engineering Springer Nature Singapore Pte Ltd, 239-250.
- Mech/IJP/5– M.Nalla Mohamed, Associate Professor has published “An Efficient Energy Absorber Based onWelded Fold Tubes for Automotive Applications”, Trends in Mechanical and Biomedical Design, Lecture notes in Mechanical Engineering, Springer Nature Singapore Pte Ltd, 251-259. Co-authored by: R.Sivaprasad
- Mech/IJP/6– Dr. K. Babu, Associate Professor has published “Statistical analysis of mechanical properties of wood dust filled jute fiber-based hybrid composites under cryogenic atmosphere using Grey-Taguchi method” along with Velmurugan (Ph.D. Scholar) in Materials Research Express, 7 (2020). (IF 1.929)
- Mech/IJP/7– Dr. K. Babu, Associate Professor has published “Utilization of Taguchi Technique to enhance the interlaminar strength of wood dust filled woven jute fiber reinforced polyester composites in cryogenic environment” along with Velmurugan (Ph.D. Scholar) in Journal of Natural Fibers, https://doi.org/10.1080/15440478.2020.1789021. (IF 2.622)
- Mech/IJP/8– Dr.L.Poovazhagan, Assoc.Prof./Mech., published a research article titled “Experimental investigations of electrochemical micromachining of nickel aluminum bronze alloy” in Materials and Manufacturing Processes Journal. (IF 3.046)
- Mech/IJP/9– Dr. M S Alphin research paper, Promotional effects of modified TiO2 and Carbon supported V2O5 and MnOx based Catalysts for selective catalytic reduction of NOx: A Review is published in Catal. Sci. Technol., 2020., Co Authors: S Raja and Sivachandiran L. (IF 5.721)
- Mech/IJP/10– The research work carried out by Dr. S. Suresh Kumar and Mr. S. Dharani Kumar (part time research scholar) titled “Numerical and Experimental Ballistic Performance of Welded Magnesium (AZ31B) Targets” has been published in Emerging Materials Research, ICE Publishing. (IF 0.413)
- Mech/IJP/11 – Dr. Arun Prakash, Asst. Prof along with Dr. Anand Ronald published a paper titled “Study of heat transfer behaviour of various mould materials used in casting” in Fourrages journal, AFPF publications, vol 244 (11) and 89-98, Nov 2020 (Clarivate IF: 0.273)
- Mech/IJP/12 – Dr. Arun Prakash, Asst. Prof along with Dr. Anand Ronald published a paper titled “Image processing based analysis of surface properties of composite produced using magnetic moulding” in Fourrages journal, AFPF publications, vol 244 (11) and 54-60, Nov 2020 (Clarivate IF: 0.273)
- Mech/IJP/13 – Dr. R. Prakash, Assoc. Prof. along with P. Naveen Kumar and Palanivelu Sangeetha published a paper titled “Analytical study on the behaviour of composite space truss structures with openings in a concrete slab” in Civil and Environmental Engineering Reports journal, Sciendo publications, vol 3(30) and 265-280, Nov 2020 (Clarivate IF: 0.23)
- Mech/IJP/14 – Dr. A. K. Lakshminarayanan, Assoc. Prof/ Mech along with R Rajasekaran, R Damodaram, and V Balasubramanian published a paper titled “Stress Corrosion Cracking Failure of Friction Stir Welded Nuclear Grade Austenitic Stainless Steel” in Engineering Failure Analysis journal, Elsevier, Nov 2020 (Clarivate IF: 2.897)
- Mech/IJP/15 – Dr. A. K. Lakshminarayanan, Assoc. Prof/ Mech along with R Rajasekaran published a paper titled “Probing the stress corrosion cracking resistance of laser beam welded AISI 316LN austenitic stainless steel” in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Oct 2020 (Clarivate IF: 1.386)
- Mech/IJP/16 – Dr. S. Vijayan, Assoc. Prof./ Mech. along with V. Vignesh, and G. Selvakumar published a paper titled “Experimental investigation and mechanism analysis: effect of concentration and temperature on the viscosity of novel mwcnt-mustard oil nanofluid” in journal of Chilean chemical society, vol 65(4), Nov 2020 (Clarivate IF: 0.58)
- Mech/IJP/17 – Mr. D. Ebenezer, Asst. Prof/ Mech along with Anush Lakshman S published a paper titled “Application of principles of Artificial Intelligence in Mechanical Engineering” in IOP Conf. Series: Materials Science and Engineering, vol 912, pp 1 – 7, Nov 2020 (Scopus IF: 0.58)
- Mech/IJP/18 – Dr. M Selvaraj, S Suresh Kumar, Ankit Kumar, Ballistic Performance of Lightweight Magnesium (AZ31B) and Aluminum (AL 6061) Plates Using Numerical Method, Trends in Mechanical and Biomedical Design, 2020/8/20, 231-238, Springer, Singapore
- Mech/IJP/19 – Mr. Ebenezer D, Dr. M Selvaraj, D Vivek, R Praveen, A Sanjay Krishnan, YK Sabapathy, 2020/8/19, Trends in Manufacturing and Engineering Management, 409-418, Springer, Singapore.
- Mech/IJP/20 – Dr. M Selvaraj, MM Metro, Effect of Nano and Microfillers in Basalt/Epoxy Composites, 2020/8/19, Trends in Manufacturing and Engineering Management, 419-432, Springer, Singapore
- Mech/IJP/21 – Dr.K Rajkumar, Dr. M Selvaraj , Study of Hexagonal Boron Nitride Particulate as Vibration Behaviour Modifier of Alternate Stacked Glass–Natural Fibre Polymer Composite Laminate, 2020/8/19, Trends in Manufacturing and Engineering Management, Springer, Singapore.451-460.
- Mech/IJP/22 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with M. M. Metro, published a journal titled “Effect of Alumina Trihydrate with Acrylonitrile Butadiene Styrene / Graphene Nanoplatelets and Basalt Fabric on Property Enhancement”, in Digest Journal of Nanomaterials and Biostructures, Vol. 15, No. 3, , pp. 953 – 962 [Clarivate IF = 0.7]
- Mech/IJP/23 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with S. Suresh Kumar and Ankit Kumar, published a journal titled “Ballistic Performance of Light Weight Magnesium (AZ31B) and Aluminium (AL 6061) Plates Using Numerical Method”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp. 231 – 238 [Scopus IF = 0.37]
- Mech/IJP/24 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with D. Vishal and S. Vijayan, published a journal titled “Study of Vibration and Tensile Characteristics of Multilayer Composites”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp.987 – 994 [Scopus IF = 0.37]
- Mech/IJP/25 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with D. Vivek, R. Praveen, A. Sanjay Krishnan, Y. K. Sabapathy and D. Ebenezer, published a journal titled “Development and Analysis of GFRP Conical Springs”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp. 409 – 418 [Scopus IF = 0.37]
- Mech/IJP/26 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with M. M. Metro, published a journal titled “Effect of Nano and Microfillers in Basalt/Epoxy Composites”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp. 419 – 432 [Scopus IF = 0.37]
- Mech/IJP/27 – Dr. M.Selvaraj, Assoc. Prof/ Mech. along with K. Rajkumar, published a journal titled “Study of Hexagonal Boron Nitride Particulate as Vibration Behaviour Modifier of Alternate Stacked Glass–Natural Fibre Polymer Composite Laminate”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp. 451 – 460 [Scopus IF = 0.37]
- Mech/IJP/28 – Dr. M.Selvaraj, Assoc. Prof/ Mech., published a journal titled “Optimizing the Parameters for Friction StirWelding of an Aluminium Alloy”, in Trends in Mechanical and Biomedical Design, Lecture Notes in Mechanical Engineering, pp. 735 – 745 [Scopus IF = 0.37]
- Mech/IJP/29 – Dr. N. Nallusamy, Prof/Mech., published a journal titled “Performance and emission analysis on the effect of exhaust gas recirculation in a tractor diesel engine using pine oil and soapnut oil methyl ester”, in Fuel, Elsevier, Vol. 290 -120077, 2021 [Co-authors: V. Venkatesan, and P. Nagapandiselvi, https://doi.org/10.1016/j.fuel.2020.120077. [TR IF = 5.578]
- Mech/IJP/29 – Dr. K. Rajkumar, Assoc. Prof/ Mech., published a journal titled “Abrasive water jet machining on Ti metalinterleaved basalt-flax fiber laminate”, in Materials and Manufacturing Processes, T&F Online, Vol. 36:3, Pg: 329-340, 2021 [Co-authors: M. Rajesh, & Dr.V.E Annamalai],https://doi.org/10.1080/10426914.2020.1832692. [TR IF = 3.05]
- Mech/IJP/31 – Dr. K. Rajkumar, Assoc. Prof/ Mech., published a journal titled “Wear and tribofilm characterization of bamboo CNT (b-CNT)-peek composite with incremental blending of submicron synthetic diamond particles”, in Wear, Vol. 203556, pg. 466-467 2021 [Co-authors: K. Vishal, & Dr.V.E Annamalai], [TR IF = 4.108]
- Mech/IJP/32 – Dr. Vimal Sam Singh, Assoc. Prof/ Mech., published a journal titled “Python implementation of fuzzy logic for artificial intelligence modelling and analysis of important parameters in drilling of hybrid fiber composite”, in IOP Conf. Series: Materials Science and Engineering, Vol. 1012 (012037), pg. 1-12 2021 [Co-authors: Achyuth Ramachandran, Anirudh Selvam and Karthick Subramanian], [Scopus IF = 0.2]
- Mech/IJP/33 – Dr. S. Rajkumar, Assoc. Prof/ Mech., published a journal titled “Experimental and modeling analysis of multiple-injection strategies with B20 operation in a CRDI engine.”, in Fuel, Elsevier, Vol. 293; 120433, pg. 466-467 2021 [Co-authors: Nivin Chacko, Jeyaseelan Thangaraja], [TR IF = 5.578]
- Mech/IJP/34 – Dr. D.Ananthapadmanaban, Assoc. Prof/ Mech., published a journal titled “Improvements and learnings in teaching learning during COVID times.”, in Journal of Huazong University of Science and Technology, Vol. 50; Iss. 3, [Scopus IF = 0.97]
- Mech/IJP/35 – Dr. D.Ananthapadmanaban, Assoc. Prof/ Mech., published a journal titled “Innovative Educational practices in Engineering colleges and their effect on quality.”, in Journal of Huazong University of Science and Technology, Vol. 50; Iss. 3, [Scopus IF = 0.97]
- Mech/IJP/36 – Dr. S. Rajkumar, Assoc. Prof/ Mech., published a journal titled “Parametric analysis of thermal behavior of the building with phase change materials for passive cooling.”, in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 1; Iss. 13, 04/2021, Co-authors: Surulivel Rajan T, Geetha N.B [TR IF = 1.184]
- Mech/IJP/37 – Dr. G. Selvakumar, Assoc. Prof/ Mech., published a journal titled “Nanometer-Scale Mechanical Properties of MWCNT-Mustard Oil Nanofluid as a Potential Base Stoke.”, in Journal of Chilean Chemical Society, Vol. 66, No. 1, Pp. 5051-5056., 04/2021, Co-authors: V. Vignesh, S. Vijayan [TR IF = 0.731]
- Mech/IJP/38 – Dr. G. Selvakumar, Assoc. Prof/ Mech., published a journal titled “Mechanical Properties of magnesium hybrid composite reinforced with Al2O3 and MoS2 particles through PM route g.”, in Materials Today: Proceedings, Vol. 37, Part 2, Pp. 2396-2400, 04/2021, Co-authors: M. Thomas Victor, S. Surendarnath, and P.Ravindran [Scopus IF = 0.3]
- Mech/IJP/39 – Dr. Poovazhagan Lakshmanan, Assoc. Prof/ Mech., published a journal titled “Electrochemical Micromachining of Hastelloy C276 by Different Electrolyte Solutions.”, in Arabian Journal for Science and Engineering, Vol. 46, pp:2243–2259, Co-authors: Gowtham Kumarasamy, Geethapriyan Thangamani [TR IF = 1.71]
- Mech/IJP/40 – Dr. Poovazhagan Lakshmanan, Assoc. Prof/ Mech., published a journal titled “Production of Micro‑holes on Duplex Stainless Steel 2205 by Electrochemical Micromachining: A Grey‑RSM Approach.”, in Arabian Journal for Science and Engineering, Vol. 46, pp:2769–2782, Co-authors: C. Gopinath, S. C. Amith [TR IF = 1.71]
- Mech/IJP/41 – Dr. Poovazhagan Lakshmanan, Assoc. Prof/ Mech., published a journal titled “Friction and Wear Study of Laser Surface Textured Ti-6Al-4V Against Cast Iron and Stainless Steel Using Pin-on-Disc Tribometer.”, in Lecture notes in mechanical engineering, Vol. 1, pp:845-854, Co-authors: N. Sankara Manikandan, M. Prem Ananth, B. Sudarsan, and A. Vishnuvarthan [Scopus IF = 0.37]
- Mech/IJP/42 – Dr. S.A. Srinivasan, Asst. Prof/ Mech., published a journal titled “Beneficial effect of CeO2 on the corrosion behaviour of AA2219 squeeze cast composites – An experimental investigation.”, in Materials Letters, Vol. 129937, Co-authors: A. Karthik, R. Karunanithi, S.P. Kumaresh babu, R. Narayanan [TR IF = 3.204]
- Mech/IJP/43 – Dr. K. Rajkumar, Assoc. Prof/ Mech., published a journal titled “A Novel Approach on Reusing Silicon Wafer Kerf Particle as Potential Filler Material in Polymer Composite.”, in Silicon, Co-authors: K. M. Nambiraj & P. Sabarinathan [TR IF = 1.499]
- Mech/IJP/44 – Dr. R Vimal Sam Singh, Assoc. Prof/ Mech., published a journal titled “Python inspired Artificial Neural Networks Modeling in Drilling of Glass-Hemp-Flax Fiber Composites”, in FME Transactions, vol. 49, iss. 2, pp. 422-429, 2021, Co-authors: Achyuth Ramachandran, Anirudh Selvam, Karthick Subramanian [TR IF = 0]
- Mech/IJP/45 – Dr. K S Vijay Sekar, Assoc. Prof/ Mech., published a journal titled “Finite element analysis of the slot milling of carbon fiber reinforced polymer composites”, in IOP Conf. Series: Materials Science and Engineering, Vol. 1128, pp. 1-9, Co-authors: C Prakash [Scopus IF = 0.2]
- Mech/IJP/46 – Dr. Vijay Sekar K S, Assoc. Prof/ Mech., published a journal titled “Experimental Investigations on the Drilling of Titanium Metal Matrix Composite”, in IOP Conf. Series: Materials Science and Engineering, Vol. 1128, Co-authors: Arun Rajesh, Bala Kumar S S, Ashok R [Scopus IF = 0.2]
- Mech/IJP/47 – Dr. S.A. Srinivasan, Asst. Prof/ Mech., published a journal titled “Beneficial effect of CeO2 on the corrosion behaviour of AA2219 squeeze cast composites – An experimental investigation”, in Materials Letters, Vol. 297 (2021) 129937, Co-authors: A. Karthik, R. Karunanithi, S.P. Kumaresh Babu, R. Narayanan [TR IF = 3.204]
- Mech/IJP/48 – Dr. A. K. Lakshminarayanan, Assoc. Prof/ Mech., published a journal titled “Application of Imaging Techniques to Determine the Post‑Yield Behaviour of the Heterogeneous Microstructure of Friction Stir Welds”, in Experimental Mechanics, Co-authors: S. Ramachandran, P. A. S. Reed, J. M. Dulieu‑Barton [TR IF = 2.496]
- Mech/IJP/49 – Dr. Lakshminarayanan AK, Assoc. Prof/ Mech., published a journal titled “In vitro degradation, haemolysis and cytotoxicity study of Mg‐0.4Ce/ZnO2 nanocomposites.”, in IET nanabiotechnology, Vol. 15, iss. 2, pp. 157-163, Co-authors: Meenachi Prabakaran, Subashini Rajakannu, Manoj Gupta [TR IF = 1.859]
- Mech/IJP/50 – Dr. G. Selvakumar, Assoc. Prof/ Mech., published a journal titled “Evaluation of the Mechanical and Electrical Properties of Spark Plasma Sintered Titanium Carbide Reinforced Alumina Ceramic Composite.”, in Archives of Metallurgy and Materials, Vol. 66 (3) Pp. 831-838, Co-authors: S. Ram Prakash, K. Rajkumar [TR IF = 0.851]
- Mech/IJP/51 – Dr. Vijay Sekar KS, Assoc. Prof/ Mech., published a journal titled “Impact of cutting parameters on machining of Ti-6Al-4V alloy: An Experimental and FEM approach”, in International Journal for Simulation and Multidisciplinary Design Optimization, Vol. 12(2), 1-7, Co-authors: Gobivel K, Prabhakaran G [Scopus IF = 0.19]
- Mech/IJP/52 – Dr. D.Ananthapadmanaban, Assoc. Prof/ Mech., published a journal titled “Facing challenges and uncertainities in work during COVID-2.”, in GIS Science Journal, Volume 8,Issue 6 [Scopus IF = 0]
- Mech/IJP/53 – N. Lenin, M. Siva Kumar, G. Selvakumar, Application of Conceive, Design, Implement and Operate (CDIO) Strategy for the Development of Engineering Education in Indian Perspective’, Journal of Education, Trustees of Boston University, Sage, https://doi.org/10.1177/00220574211016446, 2021.
- Mech/IJP/54 – Sweta Singh, Neeraj Kanwar, Divya Zindani, Vinay Kumar Jadoun, Decision making approach for assessing the suitable hybrid renewable energy based microgrid system for rural electrification in India, Materials Today: Proceedings, 2021. [Scopus IF = 0.341]
