Research

Sl.
No

82Author Name

Title of the paper

Journal Name

Year,
Volume/ Page

ISSN Number

Name of the publisher &
DOI of the paper

1 P. Tamil Selvan and N. Nallusamy

Reduced emissions using blends of diesel fuel and Chicha oil biodiesel

Energy Sources Part A: Recovery, Utilization, and Environmental Effects

Published online on April 4, 2017

ISSN: 1556-7036

Taylor and Francis,DOI:10.1080/15567036.2017.1289281

2 N. Nallusamy, P. M. Sivaram and M. Suresh

Numerical Modelling of Solar Parabolic Trough Receiver Employed for Thermal Energy Storage System

Journal of Clean Energy Technologies

Vol. 5, No. 2, 2017, pp. 107 – 113

ISSN: 1793-821X

JOCET, DOI: 10.18178/JOCET.2017.5.2.353

3 Tadivaka Srinivasa Rao, Gankidi Madhusudhan Reddy and Sajja Rama Koteswara Rao

Investigation on variations in hardness and microstructure of in-process cooled 7075 aluminium alloy friction stir welds

Materials Testing

Vol. 59, no. 2, 2017, pp. 155-160

ISSN: 0025-5300

Hanser Publisher, DOI: 10.3139/120.110977

4 S. Arokiasamy, B. Anand Ronald

Experimental investigations on the enhancement of mechanical properties of magnesium-based hybrid metal matrix composites through friction stir processing

The International Journal of Advanced Manufacturing Technology

Published online on March 3, 2017

ISSN: 0268-3768 (print version), ISSN: 1433-3015 (electronic version)

Springer, DOI: 10.1007/s00170-017-0221-5

5 B.Rajabharathi, AK Lakshminarayanan, T.Ramprabhu

Impact of friction diffusion welding parameters on the properties of rare earth containing magnesium alloy tube-tube plate welds

Journal of Alloys and Compounds

Vol. 712, 2017, pp. 355–364

ISSN 0925-8388

Elsevier, DOI: 10.1016/j.jallcom.2017.04.090

6 A.K.Lakshminarayanan, VE.Annamalai

Fabrication and performance evaluation of friction stir multiseam clad dissimilar Al-Mg Joints

Transactions of Nonferrous Metals Society of China

Vol. 27, no. 1, 2017, pp. 25-35

ISSN 1003-6326

Elsevier, DOI: 10.1016/S1003-6326(17)60004-9

7 M.Sankar, A.Gnanavelbabu, K.Rajkumar, N. A. Thushal

Electrolytic Concentration Effect on the Abrasive Assisted- Electrochemical Machining of Aluminium-Boron Carbide Composite

Materials and Manufacturing Processes

Vol. 32, No.6, 2017, 687-692

ISSN: 1042-6914

Taylor and Francis, DOI: 10.1080/10426914.2016.1244840

8 A.Praveenkumar, Nallamohamed.M

Crush Performance Analysis of Combined Geometry Tubes under Axial Compressive Loading

Procedia Engineering

Vol.173, 2017, pp. 1415-1422

ISSN 1877-7058

Elsevier, DOI: 10.1016/j.proeng.2016.12.203

9 Nallamohamed.M, A.Praveenkumar

New Insight to Improve Energy Absorption Characteristics of Long Circular Tubes with Stiffeners as Controllable Energy-dissipating Devices

Procedia Engineering

Vol.173, 2017, pp. 1399-1406

ISSN 1877-7058

Elsevier, DOI: 10.1016/j.proeng.2016.12.199

10 A.Praveenkumar, Nallamohamed.M

Numerical and Experimental Study of the Effect of Orientation and Stacking Sequence on Petalling of Composite Cylindrical Tubes under Axial Compression

Procedia Engineering

Vol.173, 2017, pp. 1407-1414

ISSN 1877-7058

Elsevier, DOI: 10.1016/j.proeng.2016.12.201

11 P.Tamilselvan. N.Nallusamy, S.Rajkumar

A comprehensive review on performance, combustion and emission characteristics of biodiesel fuelled diesel engines

Renewable and Sustainable Energy Reviews

Vol.79, 2017, pp.1134-1159

ISSN 1364-0321

Elsevier, DOI: 10.1016/j.rser.2017.05.176

12 P. M. Sivaram, N. Nallusamy and M. Suresh

Experimental and numerical investigation on solar parabolic trough collector integrated with thermal energy storage unit

International Journal of Energy Research

Vol. 40, 2016, pp. 1564-1575.

ISSN: 1099-114X

Wiley online
10.1002/er.3544

13 P. Raghu and N. Nallusamy

Spray Characteristics of Biodiesel Fuel in Constant Volume Chamber using Multi-response Optimization Technique

Journal of Thermal Science

Vol.25, No.6, 2016, pp. 581-588

ISSN: 1993-033X

Springer, DOI:10.1007/s11630-016-0901-8

14 G.Raja Kumar, G.D.Janaki Ram &S.R.Koteswara Rao

Effect of Activated flux and Nitrogen addition on the bead geometry of Borated stainless steel GTA Welds

Materials and Technolgy

50 (2016), 3, 103-110

ISSN 1580-2949

IMT-Associated Publishers

15 T.S. Rao,G.M. Reddy,S.R.K.Rao

Studies on variations in microstructure and hardness of AA7075-T651 Aluminum alloy Friction stir welds

La Metallurgia Italiana

 n.1/(2016), 29-35

ISSN 0026-0843

Associazione Italiana di Metallurgia (AIM)

16 S.Prasath,S.Vijayan,S.R.Koteswara Rao

Optimization of Friction stir welding process parameters for joining ZM21 to AZ31 of dissimilar Magnesium alloys using Taguchi Technique

La Metallurgia Italiana

 n.5/(2016), 25-33

ISSN 0026-0843

Associazione Italiana di Metallurgia (AIM)

17 Kollapuri Thamilarasan, Sadayan Rajendra Bupathi, Gankindi Madhusudhan Reddy, Tadivaka Srinivasa Rao and Sajja Rama Koteswara Rao

Salt fog corrosion behaviour of friction stir welded AA2014-T651 Aluminum alloy

Materials Testing

Vol. 58, no. 11-12, 2016, pp. 932-938

ISSN: 0025-5300

Hanser Publisher, DOI: 10.3139/120.110941

18 B. Anand Ronald, C. Arun Prakash, M. Suba Karthik, K.V.J. Arun

Influence of Steel Shot Size on the Permeability of Mould

Perspectives in Science

Vol. 8, 2016, pp. 444 – 446

ISSN: 2213-0209

Elsevier Publications, DOI: 10.1016/j.pisc.2016.04.100

19 R.Sasidharan,S.RajendraBoopathy, S.Vijayan,S.R.Koteswara Rao

Optimization of bead geometry for duplex stainless steel GTA welds using the Taguchi approach

Materials Testing

58 ,(2016), 4, 312-743.

ISSN 0025-5300

DOI 10.3139/120.110854                       Carl Hanser Verlag GmbH & Co. KG

20 Sriramkausik, M.S. Alphin

Experimental study for dynamic and surface interaction characteristic of knee In-vitro

Procedia Engineering

 vol 144,pp 321-327, Elsevier(2016)

1877-7058

Procedia Engineering, pp. 321-327, DOI: 10.1016/j.proeng.2016.05.139. ( Impact factor:0.629,  Scopus Indexed)

21 A.K.Lakshminarayanan

Enhancing the properties of friction stir welded stainless steel joints via multi-criteria optimization

Archives of Civil and Mechanical Engineering

Volume 16, Issue 4, September 2016, Pages 605-617

ISSN: 1644-9665

Elsevier,         http://dx.doi.org/10.1016/j.acme.2016.03.012

22 E.Ravikumar, N.Arunkumar, D.Ananthapadmanaban

Corrosion studies on friction welded Aluminium 6061 and Copper with Nickel interlayer

Transylvanian Review

Vol. 24, no. 12, 2016,  pp. 3340-3353

ISSN: 1221-1249

Transylvanian Review

23 S. Rajkumar, S. Bakshi, and P. S. Mehta

Multizone Phenomenological Modeling of Combustion and Emissions for Multiple-Injection Common Rail Direct Injection Diesel Engines

ASME Journal of Engineering for Gas Turbines and Power

Vol.138, no. 12, 2016, pp. 122805-122805-13

ISSN: 0742-4795

ASME, DOI: 10.1115/1.4034094

24 G. Selvakumar, K. G. Thiruppathi Kuttalingam, M.Selvaraj and J. Manohar

Enhancing Die Corner Accuracy Using Path Modification Strategy in WEDM of MONEL 400

Part C: The Journal of Mechanical Engineering Science (JMES)

Online publication on November 14, 2016

ISSN: 0022-2542

SAGE publications, DOI: 10.1177/0954406216679436

25 L. Poovazhagan, K. Jayakumar, R. Bharat, Kailash Viswanathan, M. Akshay, Adithya Jaikumar

Synthesis and machining characterization of ultrasonication assisted stir cast SiCp reinforced aluminum nanocomposite

Materials Today: Proceedings

Vol. 3, no. 6, 2016,  pp. 2339-2346

ISSN: 2214-7853

Elsevier, DOI: 10.1016/j.matpr.2016.04.145

26 Prasad Rao Kalvala, Javed Akram, Mano Misra, Damodaram Ramachandran, Janaki Ram Gabbita:,

 Low temperature friction stir welding of P91 steel

Defence Technology

12 (2016) 285-289.

ISSN: 2214-9147

Science direct &        http://dx.doi.org/10.1016/j.dt.2015.11.003

27 S. Subbaraj, Vimal Samsingh. R, M. Kanagasabai, E. F. Sundarsingh, Y. P. Selvam and S. Kingsley

Electromagnetic Nondestructive Material Characterization of Dielectrics Using EBG Based Planar Transmission Line Sensor

IEEE Sensors Journal

Vol. 16, no. 19, 2016, pp. 7081-7087

ISSN: 1530-437X

IEEE, DOI: 10.1109/JSEN.2016.2591320

28 A.K. Lakshminarayanan, V.E. Annamalai and K. Elangovan

Identification of optimum friction stir spot welding process parameters controlling the properties of low carbon automotive steel joints

Journal of Materials Research and Technology

2015, vol4(no.3), 262-272

2238-7854

Doi:10.1016/j.jmrt.2015.01.001

29 P. Tamilselvan, K. Vignesh and N. Nallusamy

Performance, combustion and emission characteristics of a compression ignition engine operating on pine oil

Biofuels

Vol. 6 (5-6), 2015, pp. 273-281.

ISSN: 1759-7269

Taylor and Francis

http://dx.doi.org/10.1080/17597269.2015.1096152

30 P. Raghu and N. Nallusamy

Study of spray characteristics of biodiesel using dimensionless analysis under non evaporating conditions

IJST, Transactions of Mechanical Engineering

Vol. 39, No. M2, 2015, pp. 389-398.

ISSN: 2228-6187

School of Engineering, Shiraz University, 71344, Shiraz, I. R. of Iran

31 Raghu Palani, Nallusamy Nallusamy and K. Pitchandi

Spray characteristics of diesel and derivatives in direct injection diesel engine by varying injection pressure

Journal of Mechanical Science and Technology

Vol. 29(10), 2015, pp. 4465-4471.

ISSN: 1738-494X

Springer
doi:10.1007/s12206-015-0945-9

32 G.Raja Kumar,G.D.J Ram & S.R.K.Rao

Microstructure and Mechanical Properties of Borated stainless steel (304B)GTA and SMA Welds

La Metallurgia Italiana

n.5/(2015), 47-52

ISSN 0026-0843

Associazione Italiana di Metallurgia (AIM)

33 G.Srinivasa Rao, VVSubba Rao,S.R.Koteswara Rao,

:Mechanical and Corrosion Properties of Friction stir welded joints of Al-Cu Alloy 2219-T87

Materials Testing

57 ,(2015), 9, 733-743.

ISSN 0025-5300

Carl Hanser Verlag GmbH&Co

34 T.Srinivasa Rao,G.M. Reddy,S.R.Koteswara Rao

Microstructure and Mechanical properties of frictions stir welded AA7075-T651 Aluminum alloy thick plates

Transactions of Non ferrous metals Society of China

25 (2015) 1770-1778.

ISSN 1003-6326

Elsevier

35 G.Raja Kumar, G.D.Janaki Ram,S.R.Koteswara Rao

:Effect of beam oscillation on borated stainless steel electron beam welds

Materials Testing

57 ,(2015), 6, 489-494.

ISSN 0025-5300

Carl Hanser Verlag GmbH&Co

36 Akhilnandh Ramesh, M. Jaya Arun Prasanth, A.Kirthivasan, M.Suresh

Heat Transfer Studies on Air Cooled Spiral Radiator with Circumferential Fins

Procedia Engineering

2015, Vol. 127, pp. 333 – 339

ISSN: 1877-7058

Elsevier, 10.1016/j.proeng.2015.11.378

37 K. Koushik Balaji and M.S. Alphin

Computer-aided human factors analysis of the industrial vehicle driver cabin to improve occupational health

 International Journal of Injury Control and Safety Promotion

Issue No: Vol. 22, No. 4 2015

1745-7300

Taylor and Fransis, DOI:10.1080/17457300.2014.992351

38 S.Santosh, K.Rajkumar and A Gnanavelbabu

Effect of hBN solid lubricant concentration on machinability of Titanium (Ti-6Al-4V) alloy

International Journal of Material Science Forum

Vols. 830-831 (2015) pp 87-90

 0255-5476

Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/MSF.830-831.87

39 S.Rajkumar and Gowrishankar Sudarshan

Multi-zone phenomenological model of combustion and emission characteristics and parametric investigations for split and multiple-injection in common rail direct injection diesel engines

Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering

2015, 229(10), pp. 1310-1326

ISSN: 0954-4070              eISSN: 2041-2991

Sage Publications, UK       DOI: 10.1177/0954407014560797

40 Poovazhagan Lakshmanan, Kalaichelvan.K and T. Sornakumar

Processing and performance characteristics of aluminum alloy-boron carbide metal matrix nanocomposites

Materials and Manufacturing processes

2015, vol. 0, pp. 1-11

ISSN: 1042-6914 print, 1532-2475 online

Taylor and Francis, DOI: 10.1080/10426914.2015.1026354

41 A.K.Lakshminarayanan, M.Suresh, and M.Sibi Varshan

Thermal performance evaluation of friction stir welded and bolted cold plates with Al/Cu interface

 Journal of The Minerals, Metals & Materials Society

Vol.67(5), pp 1032-1044, April 2015

1047-4838

Springer, DOI: 10.1007/s11837-015-1393-9

42 A.K. Lakshminarayanan, R. Saranarayanan, V. Karthik Srinivas, B. Venkatraman

Characteristics of friction welded AZ31B magnesium–commercial pure titanium dissimilar joints

Journal of Magnesium and Alloys

Volume 3, Issue 4, December 2015, Pages 315–321

ISSN: 2213-9567

Elsevier http://dx.doi.org/10.1016/j.jma.2015.11.004

43 P.Senthil Kumar, M. Bharathikumar, C. Prabhakaran, S. Vijayan and K. Ramakrishnan

Conversion of waste plastics into low-emissive hydrocarbon fuels through catalytic depolymerisation in a new laboratory scale batch reactor

 International Journal of Energy and Environment Engineering

25th Feb-15
Online pp. 1-7

 ISSN: 2251-6832

Springer-Verlag, GmbH
DOI:10.1007/s40095-015-0167-z

44 K.M.Nambiraj, R.Rajeswari and S.Madhavan

AlN-TiB2 based self-lubricating ceramic insert fabricated by spark plasma sintering for dry turning applications

 Materials Science Forum

Vols. 830-831 (2015) pp 67-70, July 2015,

2555476

Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/MSF.830-831.67

45 Vimal Samsingh Ramalingam, Malathi Kanagasabai, Member, IEEE, and Esther Florence Sundarsingh

Detection of Voids in Fiber Reinforced Plastics Using Magnetoinductive Coupled Microstrip Sensor

IEEE SENSORS JOURNAL

2015, Vol 8 Pg No 4182-4183

ISSN: 1530-437X

IEEE & 10.1109/JSEN.2015.2428813

46 Esther Florence SundarsinghVimal Samsingh Ramalingam Malathi Kanagasabai

Statistical analysis on the bandwidth of a dual frequency textile antenna

IET Microwaves, Antennas & Propagation

2015, Vol 9/ pp 1683 – 1690

ISSN :1751-8725

IET &10.1049/iet-map.2015.0223

47 A.K.Lakshminarayanan, C.S.Ramachandran, V Balasubramanian

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

Journal of Defence Technology

Vol.10, Isssue 4, pp 360–370, December 2014

2214-9147

Elsevier, doi:10.1016/j.dt.2014.07.003

48 S. Suresh Kumar, V. Naren Balaji and P.M. Prrithvi

Influence of Residual Stress on Stress Intensity Factor Estimation of Multiple Cracks in a Dissimilar welded Joint

Procedia Engineering

Vol.86, pp 234-241, Dec 2014

1877-7058

Elsevier, 10.1016/j.proeng.2014.11.033

49 S.Suresh Kumar, K.Sushinder and S.Sudersan

Finite Element Simulation of Ballistic Performance of Dissimilar Metallic Plates Welded Joints

 International Journal of Vehicle Structures & Systems

Vol. 6(4), pp 88-92, 2014

ISSN: 0975-3060 (Print), 0975-3540 (Online)

Mech Aero Foundation for Technical Research & Education Excellence doi: 10.4273/ijvss.6.4.01 .

50 A.S. Ramana
R. Venkatesh,  V. Antony Aroul Raj,  R. Velraj

Experimental investigation of the LHS system and comparison of the stratification performance with the SHS system using CFD simulation

Solar Energy

Volume 103, May 2014, Pages 378–389

ISSN:
0038-092X

Elsevier

http://dx.doi.org/10.1016/j.solener.2014.02.009

51 Dr.B.Anand Ronald, L.Vijayaraghavan & R. Krishnamurthy,

Temperature Measurement during Grinding of Metal Matrix Composites

International Journal of Machining and Machinability of Materials

2013,
Vol. 13(2/3),
pp. 253-261

ISSN:
1748-5711

Inderscience Publishers
DOI:
10.1504/ IJMMM.2013.053226

52 N. LakshmiNarasimhan and G. Venkatarathnam,

Studies on the performance of a small reciprocating compressor with different nitrogen-hydrocarbon mixtures

International Journal of Refrigeration

2013,
Vol. 36,
2091-2096

ISSN:
0140.7007

Elsevier Publishers
Doi.org/10.1016/j.ijrefig.2013.07.011

53 Seshadri R, Naveen I, Sharan Srinivasan, Viswasubrahmanyam  M, VijaySekar K S and Pradeep Kumar M

Finite Element Simulation of the Orthogonal Machining Process with Al 2024 T351 Aerospace Alloy

Procedia Engineering

2013,
Vol. 64, 1454–1463

ISSN 1877-7058

Elsevier Publication
DOI:10.1016/j.proeng.2013.09.227

54 Lakshminarayanan AK, Balasubramanian V

Use of DL-EPR Test to Assess Sensitization Resistance of AISI 409M grade ferritic stainless steel joints

Journal of Materials Engineering and Performance

2013,
Vol. 22
pp. 2293-2303

ISSN:
1059-9495

Springer Publications
DOI:10.1007/s11665-013-0521-3

55 Prithiv John, B Sriram, Senthil Kumar R, S Vinoth Kumar, Prakash R, and C Vijayram

Ventilation Improvement in A Non-AC Bus

SAE Technical Paper Series, 2013

2013
SAE paper No.
2013-01-2457

ISSN:
0148-7191

SAE International
DOI:10.427/2013-01-2457

56 Mr.M. Selvaraj
Velamurali
Koteswara Rao

Mechanism of Weld Formation during Friction Stir Welding of Aluminium Alloy

Journal of Materials and Manufacturing Processes

2013, Vol. 28, pp.595 – 600

ISSN:
1042-6914

Taylor and Francis Group
DOI:10.1080/10426914.2013.763956

57 Mr.M. Selvaraj
Velamurali
Koteswara Rao

Thermal model for friction stir welding of mild steel

Multidiscipline Modeling in Materials and Structures

2013,Vol. 9, No. 1, pp.49 – 61

ISSN:
1573-6105

Emerald Group Publishing Limited
DOI:10.1108/15736101311329151

58 Mr.M. Selvaraj

A temperature dependent slip factor based thermal model for friction stir welding of stainless steel

Sadhana, Indian Academy of Sciences

Vol. 38, Part 6, December 2013, pp. 1393–1405

ISSN:
0256-2499

Springer
DOI: 10.1007/s12046-013-0158-9

59 K Elangovan,
V.E. Annamalai 
AK Lakshminarayanan

Evaluation of micro structure and tensile shear load of friction stir spot welded automotive steel

Manufacturing Technology Today

2013,
Vol.12 (8),
pp. 17-24

ISSN:
0972-7396

Central Manufacturing Technology Institute, Bangalore

60 S. Gokul, J. Niranjan, H.A. Gopalakrishnan, B. Anand Ronald, S. Vijayan, N. Arunachalam,

Influence Of Steel Shot Size On The Properties Of Magnetic Moulded Aluminium Alloy

Journal of Manufacturing Technology Research

2012,
Vol. 4, No. 3/4,
pp.173-180

ISSN:
1943-8095

Nova Science Publishers Inc., USA

61 T.D. Lavanya and V.E. Annamalai

A performance simulator for grinding coolant evaluation

Industrial Lubrication and  Tribology

2012,
Vol. 64, No. 4,
pp.224 – 229

ISSN:0036-8792

Emerald Publishers
DOI: 10.1108/003687912112:32771

62 V.E. Annamalai

Matrix ownership -a model for quality reliability in  procurement

Int. Journal of Procurement Management

2012, Vol. 5, No.1, pp.27-42

ISSN:
1753-8432

DOI: 10.1504/IJPM.2012.044152
Inderscience

63 K.Subbaiah, M. Geetha,
 M. Govindaraju, S.R. KoteswaraRao

Mechanical     properties of Friction Stir welded Cast Al-Mg-Sc alloys

Trans. Indian Inst. Metals

2012,
Vol. 65, No. 2,
pp. 155-158.

ISSN:
0975-1645

Springer
DOI 10.1007/s 12666-011-0117-2

64 K.Subbaiah, M. Geetha, B. Shanmugarajan, S.R. KoteswaraRao

Comparative Evaluation of Tungsten Inert Gas and Laser Beam Welding of AA5083- H321

Sadhana Academy Proceedings in Engineering Sciences

2012,
Vol. 37, No. 5,
pp.587-593

ISSN:
0973-7677

Indian Academy of Sciences jointly with  Springer
DOI: NA

65 Koil Raj M., Vijayan S., and Rao S.R.K.

 Friction Stir Welding of Dissimilar Aluminum alloys: AA2219 to AA5083  Optimization of process parameters using Taguchi Method

Journal of Materials and design

2012,
Vol. 42,
pp. 1-7

ISSN:
0261-3069

Elsevier Publishers
DOI: 10.1016/j.matdes.2012:016

66 K. Babu
T. Prasanna  Kumar

Optimum CNT Concentration and Bath Temperature for Maximum Heat Transfer Rate during Quenching in CNT Nanofluids

Journal of ASTM International

2012, Vol. 9 (5), Paper ID JAI104442.
pp. 12 pages

ISSN: 1546-962X

ASTM
10.1520/JAI104442

67 K.S. Vijay Sekar and M. Pradeep Kumar

Optimising Flow Stress Input For Machining Simulations Using Taguchi Methodology

International Journal of Simulation Modelling

2012, Vol.11,
pp. 17-28.

ISSN:
1726 – 4529

DAAAM International
DOI:10.2507/IJSIMM11(1)2.195

68 Dr.A.K. Lakshminarayanan
V. Balasubramanian

Influences of welding processes on microstructure and mechanical properties of modified 12 wt % Cr ferritic stainless steel

International Journal of Manufacturing Research (IJMR)

2012,
Vol. 7, No. 4,
pp. 331-353

ISSN:
1750-0591

Inderscience publisher
DOI: 10.1504/IJMR.2012.050100

69 V.E. Annamalai

Managing knowledge in a process industry: some experiences and a framework

 International Journal of Business Information Systems

2011,
Vol. 7, No. 3,
pp.269-285

ISSN:
1746-0972

DOI: 10.1504/IJBIS.2011.039331
Inderscience

70 N. LakshmiNarasimhan and G. Venkatarathnam,

Effect of mixture composition and hardware on the performance of a single stage JT refrigerator

Cryogenics

2011
Vol. 51, pp. 446-451

ISSN:
0011-2275

Elsevier Publishers doi:10.1016/j.cryogenics.2011.05.003

71 Vijayan S. Raju R. and Rao S.R.K.

Multi-Objective Optimization of Friction  Welding Process Parameters on Aluminum Alloy AA 5083 Using Taguchi Based Grey Relation Analysis

Materials and Manufacturing Processes

2011,
Vol. 25, No. 11,
pp. 1206-1212.

ISSN:
1042-6914

Taylor and Francis Group, LLC
DOI:10.1080/10426910903536782

72  K. Babu
T. Prasanna  Kumar

Estimation and Analysis of Surface Heat Flux during Quenching in CNT Nanofluids

ASME Journal of Heat Transfer

2011, 133 (7), #071501.
pp.  8 pages

ISSN:
0022-1481

ASME

http://dx.doi.org/10.1115/1.4003572

73 K.S. Vijay Sekar and M. Pradeep Kumar

Finite Element Simulations of  Ti6Al4V Titanium Alloy Machining to Assess Material Model Parameters of the Johnson – Cook Constitutive Equation

Journal of the Brazilian Society for Mechanical Sciences and Engineering

2011, Vol. 33, pp.203-211.

ISSN:
1678 – 5878

Associação Brasileira de Engenharia e Ciências Mecânicas – ABCM
DOI: 10.1590/S1678-58782011000200012.

74 V.E. Annamalai

Developing and deploying your own rules of innovation, World review of Entrepreneurship

World Review of Entrepreneurship, Management and Sustainable Development

2010,
Vol. 6, No.1/2,
pp.35-49

ISSN:
1746-0573

Inderscience

http://dx.doi.org/10.1504/WREMSD.2010.031637

75 V.E. Annamalai

Effect of Interconnected pore Structure on Grinding Wheel Performance

International Journal of Advances in Machining and Forming Operations

2010,
Vol. 2,  No.1 , pp.27-33

ISSN:
0975-4784

International Science Press
DOI: NA

76 T.D. Lavanya and V.E. Annamalai

Design of an eco-friendly coolant for grinding using anti-bacterial additive

Intl. J. of Sustainable Design

2010, Vol.1, No.3, pp.305-313,

ISSN :
1743-8284

Inderscience
DOI: 10.1504/IJSDES.2010.036974

77 V.E. Annamalai

From Knowledge To Money  – An Industrial Perspective Of  Knowledge Management,

Journal of Knowledge Management Practice

2010,
Vol. 11, No. 4,
pp.(no page-online link)

ISSN:

ISSN 1705-9232

TLA , Canada
(The leadership Alliance Inc)
DOI: NA

78 S. Vijayan , R. Raju K. Subbaiah,
N. Sridhar and S.R.K. Rao

Friction stir welding of Al-Mg alloy optimization of process parameters using Taguchi method

Experimental Techniques

2010,
Vol. 34, No. 5,
pp. 37-44.

ISSN:
1747-1567

Wiley on behalf of Society of Experimental Mechanics
DOI: 10.1111/j.1747-1567.2009.00563.x

79 K.L. Harikrishna
S.R.K. Rao
Subba Rao

Friction stir welding of magnesium alloy ZM21

Transactions of The Indian Institute of Metals

2010,
Vol. 63, No. 5,
pp. 807 – 811.

ISSN:
0975-1645

Springer,
DOI:NA

80 T.D. Lavanya and V.E. Annamalai

The effect of dressing generated abrasive fines on the grinding process

International Journal of Abrasive Technology

2009,Vol.2, No,4,  pp.382-392

ISSN:
1752-2641

Inderscience
DOI: 10.1504/IJAT.2009.029096

81 V.E. Annamalai

Stir up trouble: Creating a path to permanent problem resolution

Quality Progress

2009, pp. 80

0033-524x

American Society for Quality
DOI: NA