S.No Journal Paper Title (Jan-Dec 2017)  Indexing (T-Thomson, S-Scopus, N-No index)  Co-Author-UG Student  Co-Author-PG Student  Co-Author-UG and PG Student combined  Co-Author-PhD Student
 1 Ramarajan and K.Subbaiah, “Effect of Heat Transfer in Tungsten Inert Gas Welding of 5000 Series Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 214-217, May 2017.  S Ramarajan (F.T)
 2 Syleshkumar.P.G and K.Subbaiah, “Effect of ER4043 Filler Rod on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 203-206, May 2017  S  Syleshkumar.P.G
 3 Waleed Ahmed and K.Subbaiah, “Effect of ER4047 Filler Rod Chemical Composition on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 210-213, May 2017.  S  Waleed Ahmed
 4 Srikrishna.S and K.Subbaiah, “Comparative Investigation of the Effect of Al-Si Filler Rods on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 207-209, May 2017.  S  Srikrishna.S
 5 Rajarajeshwari S and Ramana AS, “Experimental Investigations on Packed Bed Cooling Tower”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 1-3, May 2017.  S  Rajarajeshwari S
 6 Srimurugan R, Vijay Ramnath, Ananthapadmanaban D, N. Ramanan, “Glass Fibre reinforced Polycarbonate for Automobile Chassis Application”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 22-24, May 2017.  S
 7 DharaniKumar S, Suresh Kumar S, “A Review on Contact Ballistic Impact Studies on Monolithic Plate and Welded Joints”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 34-38, May 2017.  S  DharaniKumar S (PT)
 8 U. Magarajan, S. Suresh kumar , “A Review Paper on Aluminium Targets Subjected to Ballistic Loading”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 39-44, May 2017.  S  U. Magarajan (PT)
 9  S  Balasubramanian V (PT)
 10  S  Deepak Mani
 11  S  B. Pratheep, M. Velchandru, P. Vijay Varman, P. Monish
 12  S  C.G. Subramaniam
 13  S  Rajiv Raj S, Tarun Subramanian, Shashaank Yogesh
 14  S  Karthicraja J, Kirankarthik P, Kishore kumar J, Purushothaman T
 15  S  W. Waleed Ahmed,  Visveshwar
 16  S
 17  S  J.P. Lalith Gnanavel
 18  S
 19  S  S. Mohamed Safivudeen
 20  S  Belvin A, Jothivenkatachalapathy P, Karthi S, Jerom Zachariah S
 21  S  Lokesh M, Logeshwari K, Arivazhagan C
 22  S  M. Mohamed Niwas
 23  S  Javid J, Abdul Aziz A, Dhanushuvan P, Hemanthkumar S
 24  S   VR. Balaji, R. Tamilarasan, R. Ramsharma, C. Vasu Deva Krishnan
 25  S  Manoranjan K.S, Manoj Kumar T, Harish Narayanan V, Ashwin R
 26  S  Harikrishnan B, Balaji S.R, Manikandan P, Naveen Bharath S  P. Sabarinathan (F.T)
 27  S  Adhyanth G Ajay, S Bharatharajan and M Karthik Avinashilingam
 28  S  Guhan K, Ejaz Ahamed S, Karthick S, Naveen A.E
 29  S  Adhyanth G Ajay, S Bharatharajan and M Karthik Avinashilingam
 30  S  Ashwin S, Ajai Rao R, Agni A.S, Harish Kumar S
 31  S  Akshay Aravindan, Aniruddh R
 32  S  Aravindan V, Dineshkumar A, Giriprasath B, Karthikeyan V
 33  S  Krishna AG, Jaghan S, Easwar MK
 34  S  Ashok.R, Srinath Ramkumar.S, Vignesh Kumar.S
 35  S  Karthik P
 36  S  Gowthama Krishnan
 37  T  Navinkumar K, Roopan Doss
 38  T  Velmurugan D (F.T),
 39  T  P. Tamilselvan
 40  S  Visveshwar N  Vignesh K
 41  T  A.Praveen kumar (F.T)
 42  T
 43  T
 44  T
 45  T
 46  T
 47  T
 48  T  Y. Allwin roy  K. Gobivel (PT)
 49  T
 50  T  S. Arokiasamy (PT)
 51  T  N. A. Thushal
 52 N. Nallusamy, P. M. Sivaram and M. Suresh, Numerical Modelling of Solar Parabolic Trough Receiver Employed for Thermal Energy Storage System, Journal of Clean Energy Technologies, Vol. 5, No. 2, March 2017, pp. 107 – 113.  N (having ISSN)  P. M. Sivaram
 53 P. Tamil Selvan and N. Nallusamy, Reduced emissions using blends of diesel fuel and Chicha oil biodiesel, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol.39:10,  2017, pp.1050-1055.  T  P. Tamil Selvan
 54 Prabhuraj, P, Rajakumar, S, Lakshminarayanan, A.K, Balasubramanian, V. Evaluating stress corrosion cracking behaviour of high strength AA7075-T651 aluminium alloy, Journal of the Mechanical Behavior of Materials, Vol. 26(3-4), 2017, pp. 105-112  S
 55 B. Alwin, A. K. Lakshminarayanan, M. Vasudevan, P. Vasantharaja, Assessment of Stress Corrosion Cracking Resistance of Activated Tungsten Inert Gas-Welded Duplex Stainless Steel Joints, Journal of Materials Engineering and Performance, Vol. 26 (12) (2017)¸ pp 5825–5836  (IF: 1.331)  T  B.Alwin
 56 Aravind Murugan, R. Sai Santhosh, Ravikumar Raju, A.K. Lakshminarayanan, Shaju K. Albert, Dissimilar and Similar Laser Beam and GTA Welding of Nuclear Fuel Pin Cladding Tube to End Plug Joint”, Advanced Engineering Forum, Vol. 24, pp. 40-47, 2017, 40-47  N (having ISSN)  M.Aravind, R.Saisanthosh
 57 B.Rajabharathi, AK Lakshminarayanan, T.Ramprabhu, Impact of friction diffusion welding parameters on the properties of rare earth containing magnesium alloy tube-tube plate welds, Journal of Alloys and Compounds 712, 355–364   T  B.Rajabharathi (F.T)
 58 A.K.Lakshminarayanan, VE.Annamalai, Fabrication and performance evaluation of friction stir multiseam clad dissimilar Al-Mg Joints, Transactions of Non Ferrous Society of China (Elsevier), Transactions of Nonferrous Metals Society of China 27 (1), 25-35   T
 59 A. Jayaganth, K. Jayakumar, A. Deepak, K. Pazhanivel, Experimental studies on Drilling of 410 Stainless SteelMaterials Today: Proceedings, 2017, Accepted  S  A. Jayaganth,     A. Deepak
 60 K. Jayakumar, Study of cutting force and surface roughness in Ball nose end milling of A356 alloy/SiCp metal matrix composite, Materials Today: Proceedings, 2017,  Accepted  S
 61 Seshadri R, Naveen I, Sharan Srinivasan, Viswasubrahmanyam M, Vijay Sekar K S, Pradeep Kumar M, Finite Element Simulation of Machining of an Aerospace alloy, World Journal of Modelling and Simulation Vol. 13 (2017) No. 4, pp. 268-277  N (having ISSN)  Seshadri R, Naveen I, Sharan Srinivasan, Viswasubrahmanyam M
 62 V. R. Samsingh, M. Kanagasabai and E. F. Sundarsingh,A Novel Metamaterial Enhanced Microwave Testing System for Bare PCB Substrates Using Image Rendering Approach,IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7, no. 2, pp. 285-291, Jan. 2017  T
 63 Visveshwar, N; Vishal, V; Venkatesh, Vishal; Samsingh, R Vimal; Karthik, PragadishApplication of Quality Tools in a Plastic Based Production Industry to achieve the Continuous Improvement Cycle ,Quality-Access to Success vol. 18, no. 157, pp. 61-67, April. 2017  S  Visveshwar, N; Vishal, V; Venkatesh, Vishal; Samsingh Karthik, Pragadishv
 64 A. Deepak; R. Srivatsan; V. Samsingh ,A Case Study on Implementation of Walking Worker Assembly Line to Improve Productivity and Utilisation of Resources in a Heavy Duty Manufacturing Industry,FME Transactions FME Transactions (2017) 45, 496-502  S  A. Deepak; R. Srivatsan
 65 Poovazhagan Lakshmanan, Abrasive wear behaviour of aluminium hybrid nanocomposites produced by
ultrasonication assisted casting method, International Journal of Automotive and Mechanical Engineering, Volume 14, Issue 3, pp. 4561-4573, 2017
 S
 66  S
 67  S
 68  S
 69  T
 70  T
 71 Mathesh K S, Satheesh Kumar G (2017), Design, Fabrication and Implementation of Deweeding Robot, International Journal of Mechanical and Production Engineering, 5(6), 95-99  N (having ISSN)
 72 Satheesh Kumar Gopal, Karnik Ram, Harish S., Apeksha Avinash Somalinga and  Hanis S (2017), Development and Implementation of Visual Odometry System Using Quadcopter for Inventory Maintenance, Journal of AICS, E-Journal of the 5th International Conference on Artificial Intelligence, Computer Science & Information Technology 2017, 5(1), 1-7 N (having ISSN)
 73 S.Arokiasamy and B.Anand Ronald, Optimization of Process Parameters in Friction Stir Processing of Magnesium Metal Matrix Composites Using Taguchi Method, Journal of the Balkan Tribological Association, Vol. 23, No 1-I, 16–22 ,2017  T
 74 M. Dhananchezian, M. Rishaba priyan, G. Rajashekar, S. Sathya Narayanan (2017), Study the effect of cryogenic cooling on machinability characteristics during Duplex Stainless Steel 2205,  Materials Today: Proceedings, 2017,  Accepted  S
Vignesh K

Quick Links