Journal papers 2017

 
S.NO  Journal Paper Title (Jan-Dec 2017)  Indexing (T-Thomson, S-Scopus, N-No index)  Co-Author-UG Student  Co-Author-PG Student  Co-Author-UG and PG Student combined  Co-Author-PhD Student
1
Ramarajan and K.Subbaiah, “Effect of Heat Transfer in Tungsten Inert Gas Welding of 5000 Series Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 214-217, May 2017.
S
Ramarajan (F.T)
2
Syleshkumar.P.G and K.Subbaiah, “Effect of ER4043 Filler Rod on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 203-206, May 2017.
S
Syleshkumar.P.G
3
Waleed Ahmed and K.Subbaiah, “Effect of ER4047 Filler Rod Chemical Composition on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 210-213, May 2017.
S
Waleed Ahmed
4
Srikrishna.S and K.Subbaiah, “Comparative Investigation of the Effect of Al-Si Filler Rods on Tungsten Inert Gas Welding of AA5083-H111 and AA6061-T6 Aluminum Alloys”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 207-209, May 2017.
S
Srikrishna.S
5
Rajarajeshwari S and Ramana AS, “Experimental Investigations on Packed Bed Cooling Tower”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 1-3, May 2017.
S
Rajarajeshwari S
6
Srimurugan R, Vijay Ramnath, Ananthapadmanaban D, N. Ramanan, “Glass Fibre reinforced Polycarbonate for Automobile Chassis Application”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 22-24, May 2017.
S
7
DharaniKumar S, Suresh Kumar S, “A Review on Contact Ballistic Impact Studies on Monolithic Plate and Welded Joints”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 34-38, May 2017.
S
DharaniKumar S (PT)
8
U. Magarajan, S. Suresh kumar , “A Review Paper on Aluminium Targets Subjected to Ballistic Loading”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 39-44, May 2017.
S
U. Magarajan (PT)
9
Balasubramanian V, Selvakumar G, Thirumalaipandian N, “Barrelling Behaviour of Copper Powder Preforms under Different Lubricating Conditions”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 45-47, May 2017.
S
Balasubramanian V (PT)
10
Deepak Mani, Ananthapadmanaban D, “Welding Mechanisms during Friction Welding of Aluminium with Steel”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 53-55, May 2017..
S
Deepak Mani
11
K.L. Hari Krishna, B. Pratheep, M. Velchandru, P. Vijay Varman, P. Monish, “Development of an Integrated Tyre Inflation System”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 81-83, May 2017.
S
B. Pratheep, M. Velchandru, P. Vijay Varman, P. Monish
12
C.G. Subramaniam and V.E. Annamalai, “Recent Advancements in Shear Thickening Fluid Applications-A Review”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 84-92, May 2017.
S
C.G. Subramaniam
13
Rajiv Raj S, Tarun Subramanian, Shashaank Yogesh, V.E Annamalai, “Wood Plastic Composite”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 93-96, May 2017.
S
Rajiv Raj S, Tarun Subramanian, Shashaank Yogesh
14
Rajeswari R, Karthicraja J, Kirankarthik P, Kishore kumar J, Purushothaman T, “Optimization and comparison of process parameters of die sinking electrical discharge machined stainless steel AISI 304, AISI 304L and AISI 304H”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 97-103, May 2017.
S
Karthicraja J, Kirankarthik P, Kishore kumar J, Purushothaman T
15
W. Waleed Ahmed, Visveshwar, R. Vimal Sam Singh, “Artificial Intelligence Modelling of Process Parameters on Friction Drilling of Metal Matrix Composites”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 109-113, May 2017.
S
W. Waleed Ahmed, Visveshwar
16
V.E Annamalai, Anandam Mallik, Anish P, Diwakar, Chandrasekar, Xavier Kenendy A, “Bulk Surface Coatings for Performance Enhancement In Abrasives”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 118-120, May 2017.
S
17
J.P. Lalith Gnanavel, S. Vijayan, “Friction Stir Processing of Magnesium Alloys- Review”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 121-126, May 2017.
S
J.P. Lalith Gnanavel
18
K. Sekar, M. Ravi, K. Jayakumar, “Investigation of Wear and Mechanical Properties of A356-SiCp-Al2O3 Hybrid Composite by Stir and Squeeze casting”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 131-136, May 2017.
S
19
S. Mohamed Safivudeen, K.S. Jayakumar and N. Nallusamy, “Experimental study of discharging characteristics of sensible and latent heat storage units integrated with solar flat plate collector”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 137-139, May 2017.
S
S. Mohamed Safivudeen
20
Belvin A, Jayakumar K.S, Jothivenkatachalapathy P, Karthi S, Jerom Zachariah S, “Design and Development of Tapioca Harvesting Machine”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 140-142, May 2017.
S
Belvin A, Jothivenkatachalapathy P, Karthi S, Jerom Zachariah S
21
Lokesh M, Jayakumar K.S, Vijayan S, Logeshwari K, Arivazhagan C, “Design and Development of Ridge and Furrow Machine for Agricultural Field”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 143-145, May 2017.
S
Lokesh M, Logeshwari K, Arivazhagan C
22
K.S. Jayakumar, S. Suresh Kumar and M. Mohamed Niwas, “Influence of Loading Condition on Stress Intensity Factor Determination of Threaded Bolt”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 146-149, May 2017.
S
M. Mohamed Niwas
23
Javid J, Jayakumar K.S, Vijayan S, Abdul Aziz A, Dhanushuvan P, Hemanthkumar S, “Design and Development of Driving Mechanism for Armless People”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 150-152, May 2017.
S
Javid J, Abdul Aziz A, Dhanushuvan P, Hemanthkumar S
24
R. Prakash, VR. Balaji, R. Tamilarasan, R. Ramsharma, C. Vasu Deva Krishnan, “Design of Electronic Semi – Automatic Clutch for Manual Actuation of Clutch in a Car”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 153-158, May 2017.
S
VR. Balaji, R. Tamilarasan, R. Ramsharma, C. Vasu Deva Krishnan
25
Manoranjan K.S, Manoj Kumar T, Harish Narayanan V, Ashwin R, K.L. Hari Krishna, “Design and Development of Bomb Defusal Robotic Arm Coupled with Multi-Rotor Copter”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 165-168, May 2017.
S
Manoranjan K.S, Manoj Kumar T, Harish Narayanan V, Ashwin R
26
Harikrishnan B, K. Jayakumar, L. Poovazhagan, Balaji S.R, Manikandan P, Naveen Bharath S, “Design and Analysis of Leaf Spring for the Enhancement of Load Carrying Capacity”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 169-176, May 2017.
S
Harikrishnan B, Balaji S.R, Manikandan P, Naveen Bharath S
27
M. Suresh, Bhaarath Ramesh and S. P. Anand, “Heat Transfer Enhancement Studies in a Concentric Tube Heat Exchanger”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 177-181, May 2017.
S
Bhaarath Ramesh and S.P. Anand
28
Guhan K, K. Jayakumar, K. Rajkumar, Ejaz Ahamed S, Karthick S, Naveen A.E, P. Sabarinathan, “Synthesis and Mechanical Properties of Kenaf/E-glass fiber Hybrid Composite”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 182-185, May 2017.
S
Guhan K, Ejaz Ahamed S, Karthick S, Naveen A.E
P. Sabarinathan (F.T)
29
Adhyanth G Ajay, K L Harikrishna, S Bharatharajan and M Karthik Avinashilingam, “Design and Development of Light Weight Mechanical Staircase Climbing Trolley with Better Stress Distribution”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 192-194, May 2017.
S
Adhyanth G Ajay, S Bharatharajan and M Karthik Avinashilingam
30
N. Lakshmi Narasimhan, Ashwin S, Ajai Rao R, Agni A.S, Harish Kumar S, “Experimental Studies on the Performance of a PCM Based Thermal Storage Unit Embedded With Metal Inserts”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 195-199, May 2017.
S
Ashwin S, Ajai Rao R, Agni A.S, Harish Kumar S
31
Akshay Aravindan, M.S. Alphin, Aniruddh Ramesh and S. Karthik, “Design and Development of Temperature Sensing Mechanical Actuator using Shape Memory Alloy”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 200-202, May 2017.
S
Akshay Aravindan, Aniruddh R
32
Aravindan V, Dineshkumar A, Giriprasath B, Karthikeyan V and Ebenezer D, “Moisture removal rate of solar dryers – A review”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 218-224, May 2017.
S
Aravindan V, Dineshkumar A, Giriprasath B, Karthikeyan V
33
R. Prakash, Krishna AG, Jaghan S, Easwar MK, “Design and Optimization of Rigging & Derigging Stations for OM906, OM457 & 4D34I Engines”, Journal of Chemical and Pharmaceutical Sciences, Spl. Issue.7, pp. 162-164, May 2017.
S
Krishna AG, Jaghan S, Easwar MK
34
Ashok.R, Poovazhagan.L, Srinath Ramkumar.S, Vignesh Kumar.S, “Optimization of material removal rate in wire-EDM using fuzzy logic and artificial neural network”, Applied Mechanics and Materials, 867, pp.73-80, 2017.
S
Ashok.R, Srinath Ramkumar.S, Vignesh Kumar.S
35
N. Lakshmi Narasimhan, Karthik P, “Experimental studies on the performace of a multiple PCM thermal storage unit”, Research Journal of Pharmaceutical, Biological and Chemical Sciences, 8 (60-67), July 2017.
S
Karthik P
36
Gowthama Krishnan, Rajkumar S, “Modeling of soot characteristics of diesel engines – A review”, Research Journal of Pharmaceutical, Biological and Chemical Sciences, 8 (15-22), July 2017.
S
Gowthama Krishnan
37
Navinkumar K, MS Alphin, Roopan Doss, “Biomechanical analysis and comparison of actual lumbarbone with lumbar bone prototype”, Biomedical Research, An International Journal of Medical Sciences, 28 (6): 2519-2523, 2017.
T
Navinkumar K, Roopan Doss
38
Velmurugan D, Alphin M S, SarateSG, “Dental implant materials, implant design, and role of FEA- A brief review”, J. Evolution Med. Dent. Sci. 6(44):3487-3492, 2017.
T
Velmurugan D (F.T),
39
P. Tamilselvan, N. Nallusamy, S. Rajkumar,”A comprehensive review on performance combustion and emission characteristics of biodiesel fuelled diesel engines”, Renewable And Sustainable Energy Reviews,79, pp. 1134-1159, July 2017
T
P. Tamilselvan
40
Visveshwar N, Vignesh K, Vimal Samsingh,”AI Modeling and analysis of pivotal parameters in drilling hybrid fibre composite (HFC)”, FME Transactions,45, pp. 641-646, August 2017
S
Visveshwar N
Vignesh K
41
Dr.M.Nalla Mohamed, A.Praveen kumar,”A comparative analysis on tensile strength of dry and moisture absorbed hybrid kenaf/glass polymer composites”, Journal of Industrial Textiles,0(00), pp. 1-24, July 2017
T
A.Praveen kumar (F.T)
42
B. Jagadeesh, P. Dinesh babu, M. Nalla Mohamed, P. Marimuthu,”Experimental investigation and optimization of AWJ cutting parameters for the improvement of cut quality in CFRP laminates”, Journal of Industrial Textiles, 0(00) pp. 1-23, August 2017
T
43
K.G. Prashanth,R. Damodaram,T. Maity,P. Wang, J. Eckert”Friction welding of selective laser melted TiAl4V parts”, Material Science and Engineering A, 704, pp. 66-71, July 2017
T
44
Giacomo Flora, Jayakishan Balagurunathan, Saumitra Saxena, Jeremy P Cain, Moshan SP Kahandawala, Matthew J DeWitt, Sukhjinder S Sidhu, Edwin Corporan,”Chemical ignition delay of candidate drop-in replacement jet fuels under fuel-lean conditions: A shock tube study”, Fuel,1, pp. 457-472, August 2017
T
45
G. Srinivasa Rao, V. V. Subba Rao, and S. R. K. Rao,”Microstructure And Salt Fog Corrosion Behavior Of AA2219 Friction-Stir-Welded Aluminum Alloy”, Metal Science and Heat Treatment, 59, pp. 139-144, July 2017
T
46
G. Srinivasa Rao, V. V. Subba Rao, and S. R. K. Rao,”Microstructure And Mechanical Properties Of Welded Joints Of Aluminum Alloy AA7020-T6 Obtained By Friction Stir Welding”, Metal Science and Heat Treatment,,59, pp. 223-231, July 2017.
T
47
Tanniru Rajesh Babu, Sadayan Rajendra Boopathy, Sajja Rama Koteswara Rao, Guttikonda Raja Kumar and Gabbita Durga Janaki Ram,”Comparison of the welding behavior of P/M borated and I/M borated stainless steel”, Materials Testing, 59(9), pp. 749-754, August 2017
T
48
Y. Allwin roy, K. Gobivel, K.S. Vijay Sekar, S. Suresh Kumar, Impact of cutting forces and chip microstructure in high speed machining of carbon fiber – epoxy composite tube, Arch. Metall. Mater. 62 (3), pp.1771-1777, Oct 2017
T
Y. Allwin roy
K. Gobivel (PT)
49
Tadivaka Srinivasa Rao, Gankidi Madhusudhan Reddy and Sajja Rama Koteswara Rao”Investigation on variations in hardness  and microstructure of in-process cooled 7075 aluminium alloy friction stir welds”, Materials Testing 59 (2017) 2, 155-160
T
50
S. Arokiasamy, B. Anand Ronald, Experimental investigations on the enhancement of mechanical properties of magnesium-based hybrid metal matrix composites through friction stir processing, International Journal of Advanced Manufacturing Technology, Mar. 2017, Vol. 93, pp.493 – 503.
T
S. Arokiasamy (PT)
51
M.Sankar, A.Gnanavelbabu, K.Rajkumar, N. A. Thushal, Electrolytic Concentration Effect on the Abrasive Assisted- Electrochemical Machining of Aluminium-Boron Carbide Composite, Materials and Manufacturing processes, Vol.32 No.6, (2017), 687-692,
T
N. A. Thushal
52
N. Nallusamy, P. M. Sivaram and M. Suresh, Numerical Modelling of Solar Parabolic Trough Receiver Employed for Thermal Energy Storage System, Journal of Clean Energy Technologies, Vol. 5, No. 2, March 2017, pp. 107 – 113.
N (having ISSN)
P. M. Sivaram
53
P. Tamil Selvan and N. Nallusamy, Reduced emissions using blends of diesel fuel and Chicha oil biodiesel, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol.39:10,  2017, pp.1050-1055.
T
P. Tamil Selvan
54
Prabhuraj, P, Rajakumar, S, Lakshminarayanan, A.K, Balasubramanian, V. Evaluating stress corrosion cracking behaviour of high strength AA7075-T651 aluminium alloy, Journal of the Mechanical Behavior of Materials, Vol. 26(3-4), 2017, pp. 105-112
S
55
B. Alwin, A. K. Lakshminarayanan, M. Vasudevan, P. Vasantharaja, Assessment of Stress Corrosion Cracking Resistance of Activated Tungsten Inert Gas-Welded Duplex Stainless Steel Joints, Journal of Materials Engineering and Performance, Vol. 26 (12) (2017)¸ pp 5825–5836  (IF: 1.331)
T
B.Alwin
56
Aravind Murugan, R. Sai Santhosh, Ravikumar Raju, A.K. Lakshminarayanan, Shaju K. Albert, Dissimilar and Similar Laser Beam and GTA Welding of Nuclear Fuel Pin Cladding Tube to End Plug Joint”, Advanced Engineering Forum, Vol. 24, pp. 40-47, 2017, 40-47
N (having ISSN)
M.Aravind, R.Saisanthosh
57
B.Rajabharathi, AK Lakshminarayanan, T.Ramprabhu, Impact of friction diffusion welding parameters on the properties of rare earth containing magnesium alloy tube-tube plate welds, Journal of Alloys and Compounds 712, 355–364
T
B.Rajabharathi (F.T)
58
A.K.Lakshminarayanan, VE.Annamalai, Fabrication and performance evaluation of friction stir multiseam clad dissimilar Al-Mg Joints, Transactions of Non Ferrous Society of China (Elsevier), Transactions of Nonferrous Metals Society of China 27 (1), 25-35
T
59
A. Jayaganth, K. Jayakumar, A. Deepak, K. Pazhanivel, Experimental studies on Drilling of 410 Stainless SteelMaterials Today: Proceedings, 2017, Accepted
S
A. Jayaganth,     A. Deepak
60
K. Jayakumar, Study of cutting force and surface roughness in Ball nose end milling of A356 alloy/SiCp metal matrix composite, Materials Today: Proceedings, 2017,  Accepted
S
61
Seshadri R, Naveen I, Sharan Srinivasan, Viswasubrahmanyam M, Vijay Sekar K S, Pradeep Kumar M, Finite Element Simulation of Machining of an Aerospace alloy, World Journal of Modelling and Simulation Vol. 13 (2017) No. 4, pp. 268-277
N (having ISSN)
Seshadri R, Naveen I, Sharan Srinivasan, Viswasubrahmanyam M
62
V. R. Samsingh, M. Kanagasabai and E. F. Sundarsingh,A Novel Metamaterial Enhanced Microwave Testing System for Bare PCB Substrates Using Image Rendering Approach,IEEE Transactions on Components, Packaging and Manufacturing Technology, vol. 7, no. 2, pp. 285-291, Jan. 2017
T
63
Visveshwar, N; Vishal, V; Venkatesh, Vishal; Samsingh, R Vimal; Karthik, PragadishApplication of Quality Tools in a Plastic Based Production Industry to achieve the Continuous Improvement Cycle ,Quality-Access to Success vol. 18, no. 157, pp. 61-67, April. 2017
S
Visveshwar, N; Vishal, V; Venkatesh, Vishal; Samsingh Karthik, Pragadishv
64
A. Deepak; R. Srivatsan; V. Samsingh ,A Case Study on Implementation of Walking Worker Assembly Line to Improve Productivity and Utilisation of Resources in a Heavy Duty Manufacturing Industry,FME Transactions FME Transactions (2017) 45, 496-502
S
A. Deepak; R. Srivatsan
65
Poovazhagan Lakshmanan, Abrasive wear behaviour of aluminium hybrid nanocomposites produced by ultrasonication assisted casting method, International Journal of Automotive and Mechanical Engineering, Volume 14, Issue 3, pp. 4561-4573, 2017
S
66
A.Praveen kumar, M.Nalla Mohamed, Crush performance analysis of combined geometry tubes under axial compressive loading,Procedia Engineering 173 ( 2017 ) 1415 – 1422
S
A.Praveen kumar(F.T)
67
M. Nalla Mohamed and A. Praveen Kumar. “New insight to improve energy absorption characteristics of long circular tubes with stiffeners as controllable energy dissipating devices.” Procedia Engineering 173 (2017): 1399-1406.
S
A.Praveen kumar(F.T)
68
M. Nalla Mohamed and A. Praveen Kumar. “Numerical and Experimental Study of the Effect of Orientation and Stacking Sequence on Petalling of Composite Cylindrical tubes under axial Compression.” Procedia Engineering 173 (2017): 1407-1414.
S
A.Praveen kumar(F.T)
69
M. Nalla Mohamed, A. Jusuf, T. Dirgantara, L. Gunawan, Axial crash performance of press-formed open and end-capped cylindrical tubes – A comparative analysis, Thin-Walled Structures, Thin-Walled Structures, 2017, Accepted for publication
T
A.Praveen kumar(F.T)
70
M.Sankar, A.Gnanavelbabu, K.Rajkumar, Parametric Optimisation of Abrasive Assisted Electro Chemical Machining of Al6061-B4C-Gr Using Taguchi-Grey Technique, Journal of the Balkan Tribological Association, Vol. 23(1) (2017) 67- 87, ISNN 1310-4772
T
71
Mathesh K S, Satheesh Kumar G (2017), Design, Fabrication and Implementation of Deweeding Robot, International Journal of Mechanical and Production Engineering, 5(6), 95-99
N (having ISSN)
Mathesh K S
72
Satheesh Kumar Gopal, Karnik Ram, Harish S., Apeksha Avinash Somalinga and  Hanis S (2017), Development and Implementation of Visual Odometry System Using Quadcopter for Inventory Maintenance, Journal of AICS, E-Journal of the 5th International Conference on Artificial Intelligence, Computer Science & Information Technology 2017, 5(1), 1-7
N (having ISSN)
Karnik Ram, Harish S., Apeksha Avinash Somalinga
73
S.Arokiasamy and B.Anand Ronald, Optimization of Process Parameters in Friction Stir Processing of Magnesium Metal Matrix Composites Using Taguchi Method, Journal of the Balkan Tribological Association, Vol. 23, No 1-I, 16–22 ,2017,
T
S. Arokiasamy (PT)
74
M. Dhananchezian, M. Rishaba priyan, G. Rajashekar, S. Sathya Narayanan (2017), Study the effect of cryogenic cooling on machinability characteristics during Duplex Stainless Steel 2205,  Materials Today: Proceedings, 2017,  Accepted
S
M. Rishaba priyan, G. Rajashekar, S. Sathya Narayanan

Total – 74, Thom-22, Scopus-47, No-5
Journal publication-After Jan 2018

 75 Dr.D.Ananthapadmanaban, Mechanisms of friction and their correlation to bond strength of friction welded Ti-6Al-4V similar welds, Low Carbon steel-Stainless steel and Aluminium-Copper dissimilar welds, International Journal of Innovations in Engineering and Technology, Volume 9 Issue 3, pp 014-020, Feb 2018  N (having ISSN)  NIL  NIL   NIL   NIL

Quick Links